Kitchen Cabinets in Dallas, TX

Cabinet complaints in Dallas kitchens usually come down to one of three things: the doors look dated, the sink base has a soft floor from an old leak, or the kitchen simply does not store what they own. Each problem points to a different fix, and the cheapest fix that actually solves the problem is usually the right one.

Kitchen Cabinets in Dallas, TX: Four Ways to Get Better Cabinetry

We handle four kinds of cabinet work, and most projects use one or two of them together.

• New cabinets, built to your room. Custom cabinets are sized to the inch, which matters in older homes with out-of-square walls, odd window placement and soffits.
• New faces on existing boxes. Cabinet refacing replaces doors and drawer fronts and covers the frames, keeping the layout you already have.
• A new finish. Cabinet painting turns orange-toned oak into a clean painted kitchen when the doors themselves are solid wood in decent shape.
• Storage that works. Pantry and cabinet storage upgrades add pull-outs, drawer dividers and corner solutions to new or existing cabinets.

When cabinets are part of a larger job, they fold into kitchen remodeling in Dallas with layout, lighting and flooring planned at the same time.

Is Kitchen Cabinet Replacement Worth It, or Will Refacing Do?

Replacement is worth it when the problem is inside the box. Refacing and painting only change the surfaces you see, so they cannot fix a sink base that has rotted, shelves that have sagged or a layout that blocks the walkway.

We check five things before recommending anything:

• The sink base floor. Press on it. A soft or swollen floor means water has been there, and that cabinet at least needs replacing.
• Box material. Solid wood and plywood boxes reface and paint well. Swollen particleboard and peeling thermofoil do not.
• Square and level. Clay soil movement under Dallas slabs can rack cabinets out of square. Doors that will not close evenly may point to a foundation issue worth checking first.
• Layout. If you want an island, a wider range or a relocated sink, the boxes have to change.
• What you store. Small appliances, sheet pans and a growing family often need more drawers than an original 1980s kitchen has.

What New Kitchen Cabinets Include When We Handle the Job

A full set of new kitchen cabinets from us covers more than the boxes. The scope we write up lists each deliverable:

• A measured layout drawing with every box, filler and appliance opening dimensioned.
• Selections: door style, finish, interior accessories and hardware.
• Trim package: crown, light rail, toe kicks, end panels and scribed fillers.
• Tear-out and protection: old cabinets removed and hauled off, floors covered.
• Installation: every box set, leveled and fastened to studs.
• Final adjustment of doors and drawers after the countertops go in.

Countertops are templated only after the base cabinets are installed and level, which is why we plan countertops in Dallas on the same schedule instead of as a separate project.

How Kitchen Cabinet Installation in Dallas Works, Step by Step

1. Consultation. We visit, measure, check the sink base and boxes, and talk through what you want the kitchen to do.
2. Design and selections. You review a layout and choose door style, finish, interiors and hardware. We confirm lead times before ordering.
3. Permits when needed. If plumbing, electrical or gas work changes, we line up the permit and the licensed trades.
4. Demolition and prep. We tear out the existing boxes, check walls for plumb, and any patching, outlet moves or blocking happen while the walls are open.
5. Installation. Bases are leveled and fastened, uppers are hung, and fillers and trim are scribed to the walls and ceiling.
6. Walkthrough. After countertops are set, we adjust every hinge and drawer slide and walk the kitchen with you.

Permits and Licensed Trades on a Cabinet Job

The City of Dallas lists a cabinet swap in the same footprint, with no trade work, as not needing a permit. Moving a sink, adding circuits for under-cabinet lights or relocating a gas range changes that: the work needs a permit filed by a city-registered contractor and inspections before the walls close. Texas does not license remodelers themselves, but it does license the trades: plumbers through the Texas State Board of Plumbing Examiners (TSBPE) and electricians through the Texas Department of Licensing and Regulation (TDLR). Before hiring anyone, get the company's City of Dallas contractor registration plus each trade's license number, and confirm each one on the state agencies' public lookups.

Shaker Cabinets in Dallas and Other Door Styles for Older Homes

Shaker doors are a common choice because they suit almost every era of Dallas home, from 1920s bungalows to 1990s tract houses. A flat recessed panel inside a simple frame reads clean in a modern kitchen and traditional in an older one.

Other styles we help clients weigh include slab doors for mid-century homes, inset doors for older homes where the cabinet should look like furniture, and beaded or raised panels when a kitchen needs to match original millwork in the rest of the house. Painted finishes show every dent in a busy kitchen, so we talk honestly about stained wood or a darker paint on lower cabinets for families with kids and dogs.

What Drives the Cost of Cabinetry in Dallas?

Cabinet cost depends far more on choices than on square footage. The biggest drivers are:

• Construction level: stock, semi-custom or fully custom.
• Box material: plywood typically costs more than particleboard.
• Door style and finish: inset doors and painted finishes add labor compared with overlay doors and stained finishes.
• Height: cabinets to the ceiling mean more boxes, more trim and sometimes soffit removal.
• Interiors: pull-outs, drawer organizers and corner hardware add up quickly.
• What changes behind the walls: moving plumbing or adding circuits brings licensed trades and possibly a permit.

Refacing or painting avoids most of the box and demolition cost, which is why we check the boxes first. Our guide on custom versus semi-custom cabinets walks through the trade-offs in more detail.

Where Our Cabinet Company in Dallas Works

Our base is Lake Highlands (75238), and we take on cabinet projects across the city of Dallas, from Lakewood to Preston Hollow. Neighboring cities are a short drive: Garland kitchens with original 1970s oak are about 20 minutes away, mid-century homes in Richardson about 20 minutes, and 1970s to 1990s neighborhoods in Plano about 30 minutes. See our Dallas service area page for what we cover inside the city. Call (239) 545-0550 or schedule a consultation, and we will tell you plainly whether your cabinets need replacing at all.